5-Warranty Telecom Battery Storage Battery AGM Battery 12V 55ah

• Customization: Available
• Type: Lead-Acid Batteries
• Usage: UPS, Electric Power, Lighting, Telecom, Solar, Storage, Backup
• Model NO.: FCT12-55
• Nominal Voltage: 12V
• Discharge Rate: Low Discharge Rate
• Shape: Flat Battery
• Electrolyte: Acid
• Installation: Fixed
• Rechargeable: Chargeable
• Transport Package: by Caton Box Then Onto Pallet
• Specification: L277*W106*H222*TH222mm
• Trademark: Koyosonic & OEM
• Origin: China
• HS Code: 850720000
• Production Capacity: 1000000PCS/Month

Product Description

5-Warranty Telecom Battery Storage Battery AGM Battery 12V 55Ah

Product Description

NPF Series Description

NPF Series, also called as Euro-bat series, which is new design based on relevant requirement in INTELEC. The battery is very reasonable in struction and has occupied the leading position in the same industry. In fact, NPF series as been specially designed mainly for telecom systems. With proven compliance to the most rigorous international standards, such as IEC60896-21/22, BS6290-4, Euro-bat Guide, our NPF batteries are recognized as one of the best batteries for telecom applications. In order to ensure that the power supply is guaranteed at all times, essential facilities are backed up with high performances battery systems. Sudden breaks in the power supply are then no longer a problem. If the power suddenly fails, battery systems take over the emergency supply of power.

NPF Series Application

. Communication equipment
. Big Uninterruptible power supplies
. Telecommucation Systems
. Electronic cash registers




Main Features

. Thick pasted plates with high quality lead-tin-calcuim alloy grids for long service life
. Prevailing design in construction
. Much more energy in comparison to the battery with the same rated capacity
. Front access terminals for easy and quick connection

Battery Construction

The Construction of a VRLA battery (all the batteries from our company belong to VRLA battery) is shown above. The following is the description of the different parts consisting of our batteries.

1. Plates (Electrodes)

Plate construction is the Key to produce a good battery. Recognizing this, Koyosonic utilizes the latest technology and equipment to cast grids from a lead-calcium alloy free of antimony. The small amount of calcium and tin in the grid alloy imparts strength to the plate and guarantees durability even in extensive cycle service. Lead oxide paste is added to the grid to form the electrically electrically active material. In the charged state, the negative plate paste is pure lead and that of the Positive lead oxide. Both of these are in a porous or spongy form to optimize surface area and thereby maximize capacity.

2. Separators

The separator is made of woven glass fiber cloth with high heat and oxidation resistance. The material further offers superior electrolyte absorption and retaining ability, as well as excellent ion conductivity.

3. Electrolyte

Immobilized dilute sulfuric acid: H₂SO⁴

4. Container

^{Case material is a ABS, a high-impact proof plastic resin, Styrene, or a polypropylene-polyethylene polymer with resistance to chemicals and flammability. For 2V, 4V, 6V, 8V and 12V batteries, standard container is manufactured from ABS plastic resin (UL94HB). It is optional to use Flame Retardant ABS plastic resin (UL94V0). Each cell has 2v in voltage and 4v battery has 2 cells. 6v battery has 3 cells, 8v battery has 4 cells and 12V battery has 6 cells.} 

5. Terminals
Depending on the battery model, the terminals may be Fastern type, bolt-and-nut type, pressure-contact type, cable-and-connector type or other special types. Some are threaded-insertion type or bolt-and-nut type.
6. Relief Valve
In case of excessive gas pressure build-up inside the battery (usually caused by abnormal charging) the relief valve will open and relieve the pressure. The one-way valve ont only ensures that no air gets into the battery where the oxygen would react with the plates causing internal discharge, but also represents an important safety device in the event of excessive overcharge. Vent release pressure is between 2-6 PSI and the seal ring material is neoprene rubber.
7. Case sealing
The case sealing is tongue and groove with polyrethane, epoxy, or heat seal. The ABS plastic cover and container are sealed by a special epoxy made in Japan and is acid resistant. 

Packing Photos

Our Company

Koyosonic Power Ltd

◊Koyosonic, established in 1999 has been specialized in producing Lead-acid batteries, Li-ion batteries and Solar power system. As one of professional manufacturers in lead acid batteries, we have been devoted to research and development, manufacture and market to lead the users to have right batteries for their power system.

Factory View



Certificates

Welcome you contact us for more business Cooperation.